Why do the customers choose PS LIFT?
What makes us so exceptional?
- A leading manufacturer of lifting equipment in Poland with over 20 years of experience in the industry;
- Non-standard design: size; lifting capacity; galvanized and stainless steel, equipment, and many more;
- Individual projects always executed in deadline least 24-month warranty;
- At least 24-month product warranty;
- Post-warranty service available;
- Most of the standard products and spare parts are off-the-shelf;
- Projects from A to Z;
- Reliability of the manufactured and sold devices guaranteed;
- The company is an exclusive distributor of lifting equipment of many leading European brands.
Our realizations:
Cranes
Overhead crane with electric chain hoist
Free-standing runway – 5 000 kg capacity
PSGP 1000/2NF on a free-standing runway
Electric chain hoist in ATEX version
Underslung crane PS 16-6,5-10
Underslung crane PS 16-6,5-8,0
Free-standing runway with two synchronized hoists
Light crane system
Overhead crane
Light crane system with a support structure
The type of project
Capacity 500kg
Instead of installing chain hoist on a crane there will be a hydraulic press attached, which is used in production process of roof trusses.
Due to the assembly of the light crane system the production process will be shortened and only one operator will be needed. Before that, a wall mounted jib crane was used for the same operation, which, due to its small rotation angle and short jib length, significantly limited the ability to work efficiently.
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Crane on a 32m production tower
The challenge
The crane mounted on the tower of the fodder factory in Łuków. Designed for removal of bags through the slots in the ceiling of the tanks located one level below.
Safe and ergonomic disposal of the bags.
Industry: feed industry
The type of project
The crane is located on the level more or less +32 metres of the production tower. (6th level of the production tower)
- Lifting height 3.740m (picking the raw material on +27.40 level)
- Handling with control switch
- Lifting capacity 1,6T
- IP55 protection
- Powered along the track – conductor line, C-rail,
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Crane for GIS chain hoist
The challenge
Optimization of the metal working process. Planning and manufacturing the crane designed for dipping and removing injection moulds in special liquid.
Industry: metalworking
The type of project
Swiss electric chain hoist by GIS with two lifting speeds.
- Capacity 3000 kg
- Length 8000 mm;
- Width 2940 mm;
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Monorail for GIS chain hoist
The challenge
Achieving the maximum possible lifting height of the chain hoist. Improvement of safety and work ergonomics at the unloading Big Bag sack section.
Cosmetics industry
The type of project
Szwajcarski wciągnik łańcuchowy GIS z dwoma prędkościami podnoszenia z torowiskiem.
Zastosowanie specjalnej trawersy wygiętej ku górze, dzięki której uzyskano dodatkowe 14 cm podnoszenia worka Big Bag.
- Udźwig 2000 kg;
- Długość 3500 mm;
Wykonanie specjalne: konstrukcja cynkowana ogniowo;
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Light crane system
The challenge
Improvement of the welding station – increased efficiency. Light crane system with synchronised chain hoists with a support structure is applied.
Industry: automotive
Rodzaj projektu
Crane PS 2,5-8,2-6,6
- Capacity 250 kg;
- Width 6000 mm;
- Length 7000 mm;
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Underslung travelling crane
The challenge
Obtaining the highest lifting capacity and maintaining the maximum space between the suspension points (6000mm), by loading the roof structure in a manner that is acceptable to the constructor.
The type of project
The crane made for loading the rolls with sheet metal for hydraulic presses.
- Capacity 1150 kg;
- Lifting height 7 000 mm;
- Crane track fixation to ceiling every 6 000 m;
- Crane track length 30 000 mm.
Before, the rolls were applied with a help of the pallet truck and the sling, which was not a safe enough solution. The use of the underslung travelling crane helped to escalate safety and efficiency at work.
Before the crane was assembled, two workers had to be at one work station, now thanks to the PS-LIFT crane only one operator is needed.
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Light crane system
The challenge
Improvement of the workstation ergonomics while palletizing car trailers.
Application of the light crane system with synchronised chain hoists and substructure.
The type of project
PS crane 6,3-6,8-12,2;
- Capacity 630 kg;
- Width 7400 mm;
- Length 12 250 mm;
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
PS500
The type of project
The crane PS500 with 3,2t lifting capacity and the substructure of the crane track and the pillars
Gallery
Gotowy do rozpoczęcia projektu?
Tak jak my!
Poproś o wycenę
Zachęcamy do kontaktu w celu uzyskania bezpłatnej wyceny.
PS500
The type of project
PS 500 crane – two bridge rails on one crane track.
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
PS500
The type of project
The crane PS500 with the substructure of the crane track and the pillars
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
PS500-30-5-6
The type of project
The PS500-30-5-6 crane with the substructure of the track and the pillars. Manual or electric bridge drive on the track. Optional manual or electric chain hoist. Strong, steel construction, with the track and the pillars anchored to the floor.
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
PS100 oraz PS500
The type of project
The PS100 and PS500 crane with the substructure of the crane track and the pillars.
Gallery
Gotowy do rozpoczęcia projektu?
Tak jak my!
Poproś o wycenę
Zachęcamy do kontaktu w celu uzyskania bezpłatnej wyceny.
Light system crane
The type of project
Two light underslung cranes on a construction made of steel. Tailor-made length of the crane track.
The track can be slung directly to the ceiling or to the steel frames anchored to to the floor. Manual or electric bridge drive on the track. Optional manual or electric chain hoist, manual or electric trolley.
Dedicated to work inside the hall.
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Electric overhead crane
The type of project
Electric overhead crane with capacity 5 000 kg. Fitted to the existing track.
Dedicated to work inside or outside the hall. Also available in ATEX
Gallery
Are you ready to start the project?
We are ready too!
Send inquiry
We encourage you to contact us to receive free-of-charge quotation.
Monorail for the chain hoist
The type of project
The monorail for the electric chain hoist is underslung to the steel structure.