• capacity from 2000 kg to 6000 kg
• for reloading of vehicles, for ramps, etc.
• single scissors
• lifting with 2 hydraulic cylinders
• installed in a pit or mounted on a floor
• adjustable trap prevention safety trip bars under the platform
• mechanical adjustable stops in the base
• control unit with deadman’s switch intended for outdoor work, optionally with a key or e.g. in control box
• the platform made of tear plate
• optional – inspection hatch recommended
• optional – loadflaps that are hydraulic or manual
• upper limit switch allowing precise setting of the maximum lifting height
• optional – reinforced construction allowing to drive over the platform in a folded state of vehicles with a pressure of 2 or 6 tonnes per wheel depending on the model
• optional – securing the work area with scissor’s protection, guard rails and gates
• optional – external power pack led up to 8 m max. out of the lift table, with the possibility of placing it in a nearby building
• optional – increasing the protection class of the power pack from IP 54 to IP 65
• the use of a number of additional accessories depending on the customer’s needs

Exemplary accessories:

Limit switch – stops the lift at a pre-set height, possible to be regulated.
Loadflap – used for bridging the gap between vehicle, loading dock or other storage area. Manual or hydraulic handling. Usually this option is used with lorry loaders.
Tipping protection – helps to stabilize the lift table. Minimise the risk for the platform to hinge upward during incorrect loading. Recommended if the platform is extended above 10%.
Reinforced platform – provides extra suport to the lift table. Also included mechanical stops in the base frame.
Heavy duty execution – fitted with additional features for tables intended for intensive operation.
External power pack with steel cover – provides extra protection in exposed environments. Also provides protection if there is a risk for falling objects hitting the power pack.
Protective wire mesh – the scissors of the lift table can be fitted around the entire device with wire mesh to minimise risk of injuries. The protective wire mesh is a perfect prevention from mechanical demages of the scissors. Requires an extended platform +150 mm on each side for fitting.
Inspection hatch – provides access to the aggregate inside the lift table in its folded state.

EDMOLIFT – Swedish manufacturer of the lift tables

GRUSE – German manufacturer of the lift tables

Other platform sizes, additional options – on request