Description

Single scissors with capacity up to 1000 kg

• capacity from 500 kg to 1000 kg
• single scissors
• various application: leveling differences in height; as an element of technological line or workstation
• possible to work in- and outdoor after further equiping
• installed in a pit or mounted on the floor
• adjustable trap prevention safety trip bars under the platform
• equipped with hose burst valves and mechanical locks for servicing and maintenance
• overload protection
• control unit with deadman’s switch
• 3-phase power supply (for some models optional 1-phase)
• in standard – red colour RAL3000 (other colours on request)
• optional – possible execution of some models in the HD version, intended for very intensive work over 10,000 cycles / year or over 10 cycles / hour
• platform made of smooth metal sheet (optional – tear plate)
• possible stainless steel execution
• also lifting welding table in offer, designed to perform production and assembly works such as welding, screwing, drilling, grinding, assembly of equipment, etc.
• with a range of additional accessories according to customer’s needs

Exemplary accessories:

Wheel chassis – when equipped with wheels it becomes a lift table trolley. The wheel chassis has two fixed wheels and two swivel, braked wheels.
Truck handling chassis – The chassis makes it easy to move and transport the lift table with forklift truck or manual pallet truck.
Limit switch – stops the lift at a pre-set height, possible to be regulated.
Foot control unit – very good solution when operator needs to have his hands free.
Circular turntable – integrated with the lift table. It facilitates access of the load without necessity of switching the place of the work.
Rectangular turntable – integrated with the lift table. It facilitates access of the load without necessity of switching the place of the work.
Roller conveyor – roller conveyor or other type conveyor is often used in various production systems between locations, where different levels between lifts must be even. When choosing this option, the length and weight of the products must be stated in order to find the best solution.
Fotocell – automatic lifting and lowering of the lift table. Optionally, it is possible to make a sensor on 1 post, but then the detection area is max. 30 cm (max. Load distance from the sensor).