Description

Single scissors with capacity 3000 kg

• capacity 3000 kg
• various application: leveling diffrences in height; as an element of technological line or wokstation
• single scissors
• possible to work in- and outdoor
• installed in a pit or mounted on the floor
• adjustable trap prevention safety trip bars under the platform
• equipped with hose burst valves and mechanical locks for servicing and maintenance
• overload protection
• control unit with deadman’s switch
• 3-phase power supply (for some models optional 1-phase)
• In standard – in red colour RAL3000 (other colours on request)
• optional – possible execution of some models in the HD version, intended for very intensive work over 10,000 cycles / year or over 10 cycles / hour
• platform made of smooth metal sheet (optional – tear plate)
• possible stainless steel execution
• with a range of additional accessories according to customer’s needs.

Exemplary accessories:

Truck handling chassis – the chassis makes it easy to move and transport the lift table with forklift truck or manual pallet truck.
Limit switch –  stops the lift at a pre-set height, possible to be regulated.
Foot control unit – very good solution when operator must have his hands free.
Roller conveyor – roller conveyor or other type conveyor is often used in various production systems between locations, where different levels between lifts must be even. When choosing this option, the length and weight of the products must be stated in order to find the best solution.
Fotocell – automatic lifting and lowering of the lift table. Optionally, it is possible to make a sensor on 1 post, but then the detection area is max. 30 cm (max. Load distance from the sensor).
Lifting eye bolts  – facilitate assembly and transport of the lift tables, therefore make it safer. Some models require enlarging the platform.
Tipping protection – helps to stabilize the lift table. Minimise the risk for the platform to hinge upward during incorrect loading. Recommended if the platform is extended above 10%.
Roll-off guard – designed to prevent the load rolling off the platform during loading and unloading. Requires extension of the platform by 150 mm.